Specifications
Wing Span: 1500mm (60")
Length: 700mm
Wing Area: 2800cm2 (434sq.in)
Aspect Ratio: 8.07

Materials Required (not included in kit)
- Gorilla Glue or Polyurethane Glue
- 30min Epoxy (or 12hr)
- EPP Foam-Safe Cyanoacrylate (CA) Glue
- 3M Fiber Strapping Tape (or an equivalent)
- 3M77 Spray Adhesive
- Masking Tape
- Glad Wrap/Shrink Wrap
- 80 and 120 Grit Sandpaper (recommended)
- Covering Material

Kit Contents
1 Pre Cut EPP Wing Set
1 Pre Cut Fuselage
2 PowerBilt™ Carbon Wing Spars
1 PowerBilt™ Carbon Fuselage Spar
1 Machined Aluminum Wing Spar Joiner
1 12x6x600mm Walnut Rear Spar
3 Carbon Fiber Drag Spar Joiner Strings
2 Basswood Drag Spars
2 Balsa Elevons
1 Balsa Fin
1 Elevon Control Horn Set
2 Elevon Control Rods
2 Nylon Clevises
2 DuBro EZ Connectors

Radio Gear Required (recommended)
- 2 Metal Geared Servos: Blue Bird BMS380MAX or Hitec HS85MG
- Receiver: JR R700FM or JR R770PCM
- Battery: AA or AAA 4 cell 4.8v 600mAh+ (2 cells wide x 2 cells long)
- Transmitter: Any transmitter with ‘Elevon Mixing’ and ‘Dual Rates

Kit Features:
4 PowerBilt™ Carbon Wing Spars
2 Machined Aluminum Wing Spar Joiners
2 Carbon Sub Spars
1 Sub Spar Joiner
1 Full Length Carbon String
2 Carbon String centre

Materials Required (not included in kit)
- Gorilla Glue or Polyurethane Glue
- 30min Epoxy (or 12hr)
- EPP Foam-Safe Cyanoacrylate (CA) Glue
- 3M Fiber Strapping Tape (or an equivalent)
- 3M77 Spray Adhesive
- Masking Tape
- Glad Wrap/Shrink Wrap
- 80 and 120 Grit Sandpaper (recommended)
- Covering Material

Kit Contents:
1 Pre Cut EPP Wing Set
1 Pre Cut Fuselage
1 PowerBilt™ Carbon Fuselage Spar
2 Basswood Drag Spars
2 Balsa Elevons
1 Balsa Fin
1 Elevon Control Horn Set
2 Elevon Control Rods
2 Nylon Clevises
2 DuBro EZ Connectors

Radio Gear Required (recommended)
- 2 Metal Geared Servos: Blue Bird BMS380MAX or Hitec HS85MG
- Receiver: JR R700FM or JR R770PCM
- Battery: AA or AAA 4 cell 4.8v 600mAh+ (2 cells wide x 2 cells long)
- Transmitter: Any transmitter with ‘Elevon Mixing’ and ‘Dual Rates